A video call stutters in the room next door while a laptop plugged into the router pulls the full plan speed. The internet is fine; the wireless link is the bottleneck. Work through the list below in order — each step isolates one layer.
First, test with a cable
Plug a laptop into the router with an Ethernet cable and run a speed test. If the wired result is also slow, the problem is upstream: the modem, the line, or the plan. Call your provider before touching Wi-Fi settings.
If wired is fast, the issue is local wireless: distance, interference, band, channel, or the router itself.
The checklist
- Move closer. Test in the same room as the router. A large jump means coverage, not capacity.
- Switch to 5 GHz or 6 GHz. The 2.4 GHz band travels farther but is crowded by neighbors, Bluetooth, and microwaves. 5 GHz is faster at shorter range; 6 GHz is cleaner still on newer routers.
- Change the 2.4 GHz channel. Use 1, 6, or 11 — the three that do not overlap in most of the world.
- Reposition the router. Central, elevated, out of cabinets, away from metal, mirrors, fish tanks, and the microwave.
- Power-cycle the router and modem. Unplug both for 30 seconds, then plug the modem in first.
- Update the router firmware. Old firmware can carry bugs and missing fixes.
- Count the load. Backups, game downloads, and cloud sync on any device can saturate the link.
- Test another device. If one device is slow and the others are fine, the problem is its Wi-Fi adapter or settings.
What is usually not the problem
A speed test run next to a working microwave measures interference, not your plan. DNS affects how quickly a page starts loading, not raw throughput. A VPN adds overhead and often caps speed. More antennas on the box do not guarantee better coverage in a specific room — placement beats antenna count.
When to replace the hardware
Replace the router if it only supports 2.4 GHz, is several generations old, or cannot deliver your plan’s speed over a wired test. A cheap range extender repeats the signal and typically halves throughput at the far end; a mesh system with a wired backhaul is the better fix for a large home.
Change one variable at a time, then retest in the same spot. Fix the wired path first; most Wi-Fi complaints start there.